Wonderful Tech @Taiwan

The QSnatch malware is reportedly being used to target QNAP NAS devices. The National Cyber Security Center Finland (NCSC-FI) has received reports via the Autoreporter service in mid-October about infected devices attempting to communicate with specific command-and-control (C2) servers. No other vulnerabilities have been found in the current investigation on the malware. We have added rules to remove the QSnatch malware and released Malware Remover 3.5.4.0 and 4.5.4.0. If you have any questions regarding this issue, contact us through the QNAP Helpdesk . Recommendation For QTS 4.3.4 Install and update Malware Remover to the latest version Malware Remover 3.5.4.1 Use a stronger admin password. Enable IP and account access protection to prevent brute force attacks. Disable SSH and Telnet connections if you are not using these services. Avoid using default port numbers 443 and 8080. Recommendation For QTS 4.3.5+ To avoid attacks, we strongly recommend following the steps below: ...

QNAP NAS QTS 4.4.1.1064 Build 20190918 official release QTS 4.4.1 highlight : 1. Intel VPU support 2. Database upgrade  3. Security enhancement  Intel VPU support Now , QNAP NAS can support Intel OpenVINO VPU, Added support for Mustang-F100 FPGA and Mustang-V100 VPU cards. You can go to Control Panel and assign them as resources for the OpenVINO™ Workflow Consolidation Tool. Database Database upgrade  PostgreSQL - Added support for PostgreSQL 11.4 on the x86 NAS models. Library - Updated to SQLite 3.26.0. Security enhancement  QTS 4.4.1.1064 Build 20190918 2019-09-18 Important Notes For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php We have fixed the vulnerabilities in the following apps to ensure your data security: Surveillance Station, QVPN Service, Qfiling, Qsync Central, QcalAgent, and IFTTT Agent. To continue using these apps, go to the App Center and update them ...

QTS 4.4.0.0883 build 20190323 All NAS models supported by QTS 4.4.0 use Kernel 4.14. 2019-03-27 Important Notes Modified the file download and update settings for the China region. To learn more about NAS models that support the TR-004/TR-002, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion To use a TR-004/TR-002 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space. All NAS models supported by QTS 4.4.0 use Kernel 4.14. The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading. Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed. For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php New feature Storage ＆ Snapshot Added support for the QNAP TR-002 External RAID Enclosure. Network ...

QNAP QTS 4.3.6.1070 Build 20190919 release note is is latest build of QTS 4.3.6 QTS 4.3.6.1070 Build 20190919 2019-09-19 Important Notes To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro. The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading. Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed. This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635. For the status of QTS updates and maintenance fo...

QTS 4.3.6.0895 build 20190328 2019-03-28 Important Notes To learn more about NAS models that support the TR-004/TR-002, see the Compatibility List at https://www.qnap.com/en/compatibility-expansion To use a TR-004 external RAID enclosure to expand NAS storage space, the enclosure must have exactly one external RAID group. Individual disks cannot be used to expand NAS space. To ensure system functionality, after updating QTS to 4.3.6, please also update Container Station to 1.9 in App Center before enabling QVR Pro. The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading. Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed. This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update. Affected models: TS-131P, TS-231P,...

Hong Kong Chinese University (HKCU) is under Siege by the Hong Kong Police Force. The reason behind this is if they managed to take over HKCU, they will have access to Hong Kong Internet Exchange ( HKIX), which is located within HKCU. The HKIX serves as a hub to 99% messages that is sent and received through Internet within Hong Kong. If HKCU is fallen, every Hong Kongers' message will be monitored by Communist China and the puppet Hong Kong Government. With China's A.I., MILLIONS of Hong Kongers will be sought out, arrested, raped, have livers and kidneys harvested etc. We will be vanished without a trace afterwards systematically. We Hong Kongers are in the front line of the battle between the Free World and that of Communist Tyranny. Yet the rest of the world is just sitting back relaxed, watching and doing NOTHING except having pop corns. When you see this message, please at least share. Don't let our youngsters fight alone. We are in grave danger and it _IS_ t...

How to add Orthanc server in MediQPACS Reference this FAQ : Why can’t I import or schedule imports from other PACS servers after testing the connection when adding or editing an AE? Both servers need to add the server information of the other server, following steps to set : Please confirm your MediQPACS Server settings (Title/IP/Port) first. Click [“admin” → My NAS] Write down your MediQPACS Server Title, Internal IP, and Port. Please change your Orthanc Server settings ( Ubuntu default path : /etc/orthanc/orthanc.json ), and follow the below image to add the MediQPACS Server, fill in the MediQPACS Server Title, Internal IP and Port in the corresponding place. EX : “DEMO” : [“DEMO”, “192.168.55.15”, 22222] Go to the AE Management screen. Click . Specify the information for the new AE. Optional: Click Echo & Verify to test the AE connection to your PACS server. Click Add. The AE is added to the corresponding screen. Locate the PACS server that you want to import images from. Note: ...

How to use Home Bridge on QNAP NAS ? download link :  https://www.qnapclub.eu/index.php/en/qpkg/738 HomeKit support for the impatient (Beta] Install homebridge + Legacy Plugins Homebridge is a lightweight NodeJS server you can run on your home network that emulates the iOS HomeKit API. It supports Plugins, which are community-contributed modules that provide a basic bridge from HomeKit to various 3rd-party APIs provided by manufacturers of "smart home" devices. Since Siri supports devices added through HomeKit, this means that with Homebridge you can ask Siri to control devices that don't have any support for HomeKit at all. For instance, using just some of the available plugins, you can say: Siri, unlock the back door. [pictured to the right] Siri, open the garage door. Siri, turn on the coffee maker. Siri, turn on the living room lights. Siri, good morning! - QPKG - integration - bundled with NodeJS , automatic install on Start all files are within /opt/HomeBridge/...

Arduino CLI tutorial : How to use Arduino command line interface on QNAP NAS ? you can download it from QNAP CLUB  https://www.qnapclub.eu/index.php/en/qpkg/789 Arduino command line interface arduino-cli is an all-in-one solution that provides builder, boards/library manager, uploader, discovery and many other tools needed to use any Arduino compatible board and platforms. arduino-cli command line added to NAS $PATH on start Other information: How to enable 3rd party app center on QNAP NAS